← Back to Blog
November 5, 2026•By Bravio Team

Scheduling Battery and Filter Replacements on Medical Equipment: A Guide for Biomed Shops

medical equipment battery replacement schedulebiomed battery replacement trackingventilator filter replacement schedulePM kit replacement intervaldefibrillator battery replacementmedical device consumable replacement tracking

Short answer: schedule time-based replacements as their own task, not as a line buried in the annual PM. For each model, take the replacement items and intervals from the manufacturer's service manual (batteries, filters, oxygen sensors, PM kits), record the install date on each device, and generate the replacement work order from that date, the same way a PM is generated. Quote the parts and labour up front, stock to the schedule, and record every replacement as a part used on the work order so the next due date is never a guess.

The failure mode is familiar. The annual PM passes because the device runs on mains power during the check. Eight months later the internal battery cannot carry a transport, or a backup battery fails when the power does. Batteries and filters wear out on calendar time and usage, not on your PM cycle, so they need their own schedule.

What usually needs time-based replacement

ItemTypical devicesWhere the interval comes from
Internal and backup batteriesInfusion pumps, ventilators, defibrillators and AEDs, monitors, portable suction, transport monitorsService manual; some devices report battery health or a replace-by date
Filters (air inlet, fan, bacterial, HEPA)Ventilators, anesthesia machines, oxygen concentrators, incubatorsService manual; often hours of use as well as months
Oxygen and flow sensorsVentilators, anesthesia machinesService manual; sensor calibration or replacement prompts
PM kits (seals, O-rings, valves)Anesthesia machines, ventilators, sterilizersManufacturer PM kit schedule, often every one or two years
Pads, electrodes and accessories with expiry datesDefibrillators and AEDsExpiry date printed on the item

Use the manufacturer's documentation for the actual intervals and parts; they vary by model and by how hard the equipment is used. Where the customer runs an alternate equipment maintenance (AEM) program, agree in writing which replacements it covers, because AEM changes maintenance frequency, not the need to replace a battery that is worn out.

How to set up the schedule

  1. List replacement items per model. Go through the service manual for every model you cover and list each time- or hours-based item with its interval and part number.
  2. Record the install date on each device. If you do not know it, replace at the next visit and start the clock, or test and record capacity where the device allows.
  3. Make it its own scheduled task. In most CMMS tools that means a second PM plan or a multi-visit plan on the device, so "annual PM" and "battery replacement every N months" each raise their own work order.
  4. Line it up with visits. Pull replacements due in the next 60 to 90 days into the nearest PM visit to save a trip.
  5. Record the replacement as a part used. Part number, lot or serial if relevant, date, technician. That record is what the next due date and any recall check depend on.

Quote it, stock it, bill it

  • Decide where it sits in the contract. Batteries and filters are commonly excluded from full-service parts coverage or capped; say so in the contract (see how to price a biomed service contract).
  • Send the customer a forward list. A quarterly list of replacements due, with parts cost, lets them approve or budget before the work. An estimate with an approval link saves the back-and-forth.
  • Stock to the schedule. Your replacement list for the next quarter is your purchasing list. Batteries age on the shelf too, so do not overstock.
  • Watch recalls. Batteries feature regularly in FDA medical device recalls. Recording part numbers and lots on each replacement is what lets you find affected devices quickly (search the FDA medical device recalls list).

How Bravio helps

In Bravio, multi-visit PM plans handle cycles made of different visits (for example quarterly checks plus an annual inspection), so a replacement can be built into the cycle where the intervals line up, or raised as its own work order when they do not. Upcoming and missed work is listed by facility, estimates go to the customer with an approval link, and parts used come off the technician's van stock and are recorded on the work order. See medical equipment PM software, biomed repair shop software, or get started free.

Frequently asked questions

How often should medical equipment batteries be replaced?

At the interval in the manufacturer’s service manual for that model, adjusted for how the device is used. Record the install date on each device and schedule the replacement as its own task rather than relying on the annual PM to catch a weak battery.

Should battery replacement be part of the annual PM?

Check the battery during the PM, but schedule replacement separately from its own install date and interval. Batteries wear on calendar time and use, and a device running on mains power can pass its PM with a battery that will fail in use.

Are batteries covered by a full-service biomed contract?

Only if the contract says so. Many full-service contracts exclude or cap batteries, filters and accessories. State it clearly and send customers a forward list of replacements due.

One place to run
your biomed repair shop.

Sign up and you’re in. We move your data over, free. No card.

See how we work →